STONE EFFECT COATING


Preparation ans application procedure

PREPARATION
Procedure:

  • Rinse the surface thoroughly with a pressure washer.
  • Clean with TexNov Surface preparer.
  • Vigorously brush the surface and let sit for 15 minutes keeping the surface wet.
  • Rinse the surface thoroughly with a pressure washer.
  • Let the surface dry over a 48-hour period of good weather prior to applying the finish coating
FINISH COATING
After preparing the surface…

Procedure:

  • Apply two coats of TexNov Acrylic Coating. Use a brush or roller with 10 mm bristles (24 hours between each coat).
  • Let the surface dry for 24 hours before applying the sealant.
SEALANT
After preparing the surface and applying the coating…

 Procedure:

  • Apply 2 coats of TexNov Met-30 Sealant. Use a brush or roller with 10 mm bristles (24 hours between each layer).
  • Let the surface dry for 24 hours.

MAINTENANCE :

Clean the surface with TexNov Surface Preparer (3 water / 1 Preparer). Let dry and add a coat of Met-30 Sealant every 3 years or as needed. This should enable you to keep your surface in good condition.