STONE EFFECT COATING

Procedure for preparation and application of acrylic coating on an exterior surface coated with Stone effect brand coating

PREPARATION
Procedure:

  • Rinse the surface well with a pressure washer.
  • Apply TexNov Surface Preparer according to the dilution table below.
  • Brush the surface vigorously and leave for 15 minutes.
  • Rinse the surface thoroughly with a pressure washer.
  • Allow the surface to dry for 24 hours in good weather before applying the finishing coat.
FINISH COATING
Procedure:

  • Apply 2 coats ofTexNov Acrylic Coating, using a brush or roller with 10 mm bristles.
  • Allow 24 hours drying time between coats.
  • Allow the surface to dry for 24 hours before applying the sealant.
SEALANT
Procedure:

  • Apply 2 coats of
    Met-30 TexNov sealer,
    using a brush or roller with 10 mm bristles.
  • Allow 24 hours of good weather to dry between coats.
  • Let the surface dry for 24 hours.

MAINTENANCE :

Clean the surface with TexNov Surface Preparer by diluting 9 parts of water and 1 part of Preparer. Let dry and add a coat of Met-30 Sealer every 3 years or as needed, which should allow you to keep your surface in good condition.