MASONITE AND CANEXEL (CLAPBOARD)

• Rinse the surface thoroughly with a pressure washer.
• Clean with TexNov Surface preparer.
• Vigorously brush the surface and let sit for 15 minutes keeping the surface wet.
• Rinse the surface thoroughly with a pressure washer.
• Let the surface dry over a 48-hour period of good weather prior to applying the finish coating

Procedure:

• Onto the Masonite if the surface is cardboard, apply a coat of TexNov Met-30 Sealant before applying the coating, otherwise rings will appear on the surface. Use a brush or roller with 10 mm bristles (24 hours between each coat).
• Let the surface dry for 24 hours before applying the finish coating.

Procedure:

• Apply two coats of TexNov Acrylic Coating. Use a brush or roller with 10 mm bristles (24 hours between each coat).
• Let the surface dry for 24 hours.