MASONITE AND CANEXEL (CLIN)


Preparation and application procedure

PREPARATION
Procedure:

  • Rinse the surface thoroughly with a pressure washer.
  • Clean with TexNov Surface Preparer according to the dilution table below.
  • Brush the surface vigorously and let it sit for 15 minutes, keeping the surface moist.
  • Rinse the surface thoroughly with the pressure washer.
  • Allow the surface to dry for 24 hours in good weather before applying the finish coat
SEALANT
Procedure:

  • On Masonite, if the surface is made of cardboard, apply a coat of TexNov Met-30 sealer before applying the coating, otherwise rings will appear on the surface. Use a brush or roller with 10 mm bristles and allow 24 hours of drying time between each coat.
  • Allow the surface to dry for 24 hours before applying the topcoat.
FINISHING COAT
Interview:

  • Apply two coats of TexNov acrylic coating. Use a brush or roller with 10 mm bristles and allow 24 hours of drying time between each coat.
  • Let the surface dry for 24 hours.

MAINTENANCE:

Clean the surface with TexNov Surface Preparer diluted with nine parts water to one part product.