FIBER GLASS

Preparation and application procedure

PREPARATION
Procedure:

  • On fiberglass, sand with a roller sander (with 40 grit sandpaper).
  • Wash with acetone.
  • Rinse well.
  • Let dry completely.

Note:

  • If the fiberglass is cracked and water has seeped under the resin, the life of your floor is over.
FINISH COATING
Procedure:

  • In hot weather dilute with water (50 ml/per litre) to facilitate application.
  • Apply 2 coats ofTexNov Acrylic Coating using a brush or roller with 10 mm bristles (24 hours between coats).
  • Allow the surface to dry for 24 hours before applying the sealant.
SEALANT
Procedure:

  • Apply 2 coats of Met-30 TexNov sealer. Use a brush or roller with 10 mm bristles (24 hours between each coat).
  • Let the surface dry for 24 hours.

MAINTENANCE :

Clean the surface with TexNov Surface Cleaner (dilute 9 parts of water to 1 part of Preparer). Let dry and add a coat of Met-30 Sealer every 3 years or as needed, which should allow you to keep your surface in good condition.