The FlexRoll product from the TexNov brand is a product with double action, primer properties to receive the topcoat with great crack-sealing power.
Its 100% acrylic formulation and its high viscosity allow it to create an air and water barrier on both interior and exterior surfaces.
FlexRoll is applied using a brush or roller and its covering power is 800 sq. ft. for the 18.9 L format.
The product is also available in 10 L format.
Use the FlexRoll on multiple substrates, such as:
- rigid insulation;
- the concrete.
Use the FlexRoll to apply a pre-colored basecoat and resurfacing on existing surfaces.
- Gives a matte finish color that coordinates very well with exterior and interior finishes
- Refresh the coating
- Gypsum panels
Available in sizes: 18.9 L and 10 L
FlexRoll is a liquid coating based on acrylic resins, available in all the standard colors produced by TexNov. FlexRoll has been specially developed as a base coat before the application of the finishing plaster (coordinate the color of the base plaster to the color of the finishing plaster).
TexPro FlexRoll is designed for application over concrete, masonry, gypsum board and stucco surfaces. It can also be used to refresh acrylic, stucco or roughcast surfaces. It also has the property of preventing efflorescence from appearing on the surface of finishes.
The amount to apply will depend on the roughness and porosity of the surface and the application technique.
For the 18.9 L (5 gal.) format
General ± 74.3 m² (± 800 ft²)
For more information on storage, protections to take, application procedures, mixing if necessary and more, see the product data sheet.
Access to the TexPro finishing products data sheet here
Find out more about TexNov products by visiting the website www.texnov.com