Tools needed

  • Clean bucket for diluting and mixing products
  • Grinder with abrasive disc for concrete
  • Empty refillable spray bottle for surface preparation
  • 10mm bristle roller, extendable roller handle and roller cage for fine or regular TexNov
  • Trowel and mortar holder for Sand-Tex or Rus-Tex plaster
  • Paint mixer to prepare TexNov 200
  • Siding tape to protect your home’s existing siding
  • Pressure washer 2000 lbs
  • Tarps or other to protect surrounding decorative elements, such as shrubs, railings, light fixtures, windows or other.

Products needed

The project in stages

  1. Remove any existing coating, paint or sealant with the appropriate tools depending on the type of material to be removed
  2. Cleaning the surface with TexNov Surface Preparer diluted according to the dilution table
  3. Application of the cementitious base
  4. Embed the fiberglass mesh in the cement base
  5. Application of the finishing coat with TexNov’s fine-textured, regular, Sand-Tex or Rus-Tex acrylic coating.

Photos of the project

Contact us at 1 877 316-6388 or with any questions or comments or visit one of our dealers to purchase the products.

Find out more on the website