BRICK AND TILE


Preparation and application procedure

PREPARATION
Procedure:

  • Rinse the surface thoroughly with a 3500 lb. pressure washer.
  • Clean with TexNov Surface Preparer.
  • Vigorously brush the surface and let sit for 15 minutes keeping the surface wet.
  • Rinse the surface thoroughly with a pressure washer.
  • Let the surface dry over a 48-hour period of good weather prior to applying the finish coating ?
FINISH COATING
After preparing the surface…

 Procedure:

  • Apply two coats of TexNov Acrylic Coating. Use a brush or roller with 10 mm bristles (24 hours between each coat).
  • Let the surface dry for 24 hours before applying the finish coating.

 Note:

• TexNov Acrylic Coating can be applied to almost every type of brick or concrete roof tiles on condition the roof is in good shape. ?
SEALANT
After preparing the surface and applying the coating (if necessary) …

 Procedure:

  • You can apply TexNov WRS-40 Sealant (waterproof sealant) to seal the surface. (Optional) Use, brush or roller with 10 mm bristles or a sprayer.
  • Let the surface dry for 24 hours.

MAINTENANCE :

Clean the surface with TexNov Surface Preparer (3 water / 1 Preparer). Let dry and add a coat of WRS-40 Sealant every 5 years or as needed. This should enable you to keep your surface in good condition.

EXAMPLES ON BRICK WALLS

Before
After
After