ASBESTOS COVERING


Preparation and application procedure

PREPARATION
Procedure:

  • Rinse well with a pressure washer.
  • Clean with TexNov Surface Cleaner, following the dilution grid below.
  • Let act for 15 minutes while keeping the surface wet.
  • Rinse the surface well.
  • Let the surface dry over a 24-hour period of good weather before applying the finish coating.                                
FINISH COATING
Procedure:

  • Apply two coats of TexNov Acrylic Coating.
    Use a brush or roller with 10 mm bristles (24 hours between each coat).
  • Let the surface dry for 24 hours.
SEALANT
Not applicable

MAINTENANCE :

Clean the surface with TexNov Surface Cleaner by diluting one part of product on nine parts of water.