ALUMINIUM SIDING


Preparation ans application procedure

PREPARATION
Procedure:

  • Rinse the surface well with a 2000 lb. pressure washer.
  • Apply and scrub the TexNov Surface Preparer.
  • Let act for 15 minutes by keeping the surface wet.
  • Let the surface dry for 24 hours prior to applying the finish coating.

Note:

  • In places where there is RUST, apply a primer to metal previously.
FINISH COATING
After preparing the surface…

 Procedure:

  • Apply 2 coats of TexNov Acrylic Coating. Use a brush or roller with 10 mm bristles (24 hours between applying each coat).
  • Let the surface dry for 24 hours before applying the sealant.
SEALANT
After preparing the surface and applying the coating (if necessary) …

Procedure:

  • To obtain a surface that will remain beautiful for a long time, apply TexNov Met-30 Sealant or TexNov WRS-40 Sealant for horizontal surfaces. Use, brush or roller with 10 mm bristles or a sprayer.
  • Let the surface dry for 24 hours.

MAINTENANCE :

Clean the surface with TexNov Surface Preparer (3 water / 1 Preparer). Let dry and add a coat of Met-30 Sealant every 3 years or as needed. This should enable you to keep your surface in good condition.